1. Headphone jack
This jack allows you to connect a headphone with a stereo mini-plug.
2. Headphone volume dial
Control the volume of the headphone connected to the drive by turning
the dial to the left (volume decreases) or right (volume increases).
3. Disc Loading Tray
This tray holds the disc. Open the loading tray by pressing the STOP/
EJECT Button. Place a CD on the tray with the label side up. Press the
STOP/EJECT Button or push the front part of the tray to load the disc.
4. WRITE indicator (Red LED)
This LED flashes when data is being written on the disc.
5. READ indicator (Green LED)
This LED lights up when you place a disc on the drive tray and turns off
when the disc is removed. The LED flashes when data is being read
from the disc.
6. Emergency Eject Pinhole
The Emergency Eject Pinhole allows you to manually eject a disc when
theSTOP/EJECT Button does not work due to power failure or software
problems. Insert the emergency eject pin or a paper clip into this hole
to manually eject the tray and the disc. Refer to page 24 for details.
Turn-off your computer before using the Emergency Eject Pinhole.
ASUS CRW-5232A User Manual