Installation; System Requirements - Asus CRW-5232A User Manual

Installation

System Requirements

Before installing the CRW-5232A drive, make sure that your computer
system meets the following requirements.
• IBM-compatible Pentium III 700MHz or Celeron 700MHz or
AMD Duron 850 MHz or higher PC
®
• Windows 98SE/ME/2000/NT/XP operating system
• At least 64MB RAM (128MB recommended)
• An empty 5.25-inch drive bay
• HDD empty storage capacity of 100MB or more
Average seek time: 20ms or less
Transmission rate: 2 MB/s or more
• Recommended media:
CD-R Acer, AMT, CMC, Kodak, LeadData, Maxell, Mitsubishi
Chemical, Mitsui, Nan Ya, Philips, Princo, Prodisc,
Ricoh, Ritek, Sony, Taiyo, Yuden, TDK, Verbatim,
Yamaha
CD-RW Acer, AMT, CMC, Digimaster, Maxell, MaxMax, Melody,
Mitsubishi Chemical, Philips, Plextor, Prodisc, Ricoh,
Ritek, Sony, TDK, Traxdata, Verbatim, Yamaha
1. Avoid using a hard disk that thermally calibrates during operation.
2. Do not insert damaged or warped disc in the drive to avoid potential body
injury or damage to the drive.
ASUS CRW-5232A User Manual 17