Usb Connectors - Pegatron IPMTB-GS Reference Manual

7 Connectors
Serial ATA connectors
These connectors are for the Serial ATA signal cables for Serial ATA devices.

USB connectors

These connectors are for USB 2.0 ports. Connect a USB module cable to any
of these connectors, then install the module to a slot opening at the back of the
system chassis. These USB connectors comply with USB 2.0 specification that
supports up to 480 Mbps connection speed.
WARNING: Never connect a 1394 cable to the USB connectors. Doing so
will damage the motherboard!
IPMTB-GS Motherboard Reference Guide
SATA4
SATA3
F_USB4 F_USB3
SATA2
SATA1
F_USB2
19