Installling The Cpu Heatsink And Fan - Pegatron IPMTB-GS Reference Manual

3 Central Processing Unit (CPU)

Installling the CPU heatsink and fan

The processor require a specially designed heatsink and fan assembly to ensure
optimum thermal condition and performance. When you buy a boxed processor,
the package includes the CPU fan and heatsink assembly.
NOTE: Install the motherboard to the chassis before you install the CPU fan and
heatsink assembly
NOTE: If you buy a CPU separately, make sure that you use only Intel
multi-directional heatsink and fan and make sure that a Thermal Interface
Material is properly applied to the CPU heatsink or CPU before you install the
heatsink and fan assembly.
1. Place the heatsink on top of the installed CPU, making sure that the four fasteners match the holes on the
motherboard.
2. Push down two fasteners at a time in a
diagonal sequence to secure the heatsink
and fan assembly in place.
B
A
10
3. When the fan and heatsink assembly is in place, connect the CPU fan
cable to the connector on the motherboard.
A
B
NOTE: Make sure each fastener
is oriented as shown, with the
narrow groove directed outward.
Fastener
Motherboard hole
IPMTB-GS Motherboard Reference Guide
-certified
®
CPU FAN