Olympus E-M1 Instruction Manual page 21

2 Lightly press the shutter button down to the fi rst position. (Press halfway.)
• The AF confi rmation mark (() will be displayed, and a green frame (AF target) will
be displayed in the focus location.
• The ISO sensitivity, shutter speed and aperture value that have been set
automatically by the camera are displayed.
• If the AF confi rmation mark blinks, the subject is not in focus. (P. 140)
3
Press the shutter button again to take a picture. (Press all the way down.)
• The shutter sounds and the picture is taken.
• The shot image will be displayed on the monitor.
Pressing the shutter button halfway and all the way down
The shutter button has two positions. The act of lightly pressing the shutter button to the
fi rst position and holding it there is called "pressing the shutter button halfway," that of
pressing it all the way down to the second position "pressing the shutter button all (or the
rest of) the way down."
y Cautions
• You can change the viewfi nder display style. In this manual, [Style 1] is used.
g [Built-in EVF Style] (P. 100)
• Auto viewfi nder selection is not available if the angle of the monitor has been changed.
• To display a menu of auto viewfi nder selection options, press and hold the u button.
g [EVF Auto Switch] (P. 100)
Press the shutter
button halfway.
AF confi rmation mark Shutter speed
Press the rest of
Press halfway
AF target
250 F5.6
Aperture value
the way down
2
ISO-A ISO-A 01:02:03
e e
1023
200 200
EN 21