Table of Contents
Advertisement
Error codes
Monitor
indication
No Card
Card Error
Write Protect
Card Full
Card Setup
Clean the contact area of
the card with a dry cloth.
Clean Card
Format
13
No Picture
Picture Error
The Image Cannot
Be Edited
Picture Error
142 EN
Possible cause
The card is not inserted, or it
cannot be recognized.
There is a problem with the card.
Writing to the card is prohibited.
• The card is full. No more
pictures can be taken or no
more information such as print
reservation can be recorded.
• There is no space in the card
and print reservation or new
images cannot be recorded.
Card cannot be read. Card may
not have been formatted.
Set
There are no pictures on the
card.
The selected picture cannot be
displayed for playback due to
a problem with this picture. Or
the picture cannot be used for
playback on this camera.
Pictures taken with another
camera cannot be edited on this
camera.
Images cannot be transferred
between devices that are
currently receiving or transmitting
data.
Corrective action
Insert a card or insert a different
card.
Insert the card again. If the
problem persists, format the card.
If the card cannot be formatted, it
cannot be used.
The card write-protect switch is
set to the "LOCK" side. Release
the switch. (P. 127)
Replace the card or erase
unwanted pictures.
Before erasing, download
important images to a PC.
• Select [Clean Card], press
Q and turn off the camera.
Remove the card and wipe dry
the metallic surface with a soft,
dry cloth.
• Select [Format][Yes], and then
press Q to format the card.
Formatting the card erases all
data on the card.
The card contains no pictures.
Record pictures and play back.
Use image processing software to
view the picture on a PC.
If that cannot be done, the image
fi le is damaged.
Use image processing software to
edit the picture.
Increase the amount of memory
available on the card, for example
by deleting unwanted images,
or choose a smaller size for the
images being transmitted.
Advertisement
Table of Contents
