S Button/Dial/Lever; T Release/J - Olympus E-M1 Instruction Manual

Hide thumbs Also See for E-M1:
Table of Contents

Advertisement

S Button/Dial/Lever

Option
Button Function
Dial Function
Dial Direction
Mode Dial
Function
t Lever
Function
u+v
7

T Release/j

Option
Rls Priority S
Rls Priority C
j L fps
j H fps
j Image
Stabilization
Half Way Rls
With IS
Lens I.S. Priority
Release Lag-Time
* This will shorten the battery life. Also make sure that the camera is not subject to sharp
impacts while in use. Such impacts may cause the monitor to stop displaying subjects. If
this happens, turn the power off and on again.
94 EN
Choose the function assigned to the selected button.
[UFunction], [VFunction], [RFunction],
[tFunction], [YFunction], [ZFunction], [IFunction],
[GFunction], [nFunction], [mFunction],
[nFunction], [lFunction]
You can change the functions assigned to the rear dial and
front dial.
Choose the direction in which the dial is rotated to adjust
shutter speed or aperture. Change the program shift
direction.
Customize the shooting mode set by the mode dial. You can
apply saved Myset settings. [Myset1] - [Myset4] (P. 79) can be
selected when the settings are registered.
You can use the positioning of the lever to change the
function of the dials and button.
Choose [On] to assign buttons different roles according to
the position of the lever. With the lever in Position 2, the
AFm button can be used to adjust fl ash settings and the
jYHDR button bracketing settings.
If [On] is selected, the shutter can be released even when
the camera is not in focus. This option can be set separately
for S-AF (P. 75) and C-AF (P. 75) modes.
Choose the frame advance rates for [S] and [T]. Figures
are the approximate maximums.
When set to [On], the image stablizer will turn on for
sequential shooting.
If set to [On], image stabilization operates when you press
shutter button halfway.
If [On] is selected, priority is given to the lens function
operation when using a lens with an image stabilization
function.
If [Short] is selected, the time lag between fully pressing the
shutter button and the shot being taken can be shortened.*
Description
Description
S
c
MENU
g
103
105
52, 82
T
c
MENU
g
57

Advertisement

Table of Contents
loading

Table of Contents