Basic Operations; Vr Format Disc Playback; About Vr Format Discs - Rotel RDV-1050 Owner's Manual

Hide thumbs Also See for RDV-1050:
Table of Contents

Advertisement

Audio Selection
During playback, selects the audio channel.
1. Open the pull-down window.
2. Press /
to select a desired audio
32 14
track.
3. Press ENTER
to begin playback with
35
the selected audio.
OFF
Subtitle On/Off
ON
During playback, turns on or off the subtitle
display.
1. Open the pull-down window.
2. Press
/
to select "ON" or "OFF."
32 14
3. Press ENTER
.
35

VR Format Disc Playback

NOTE: Make sure that the TV - DVD switch
on the remote control unit is set to "DVD"
when using the
/ /
/
buttons for controlling the unit.

About VR Format Discs

The unit can play back DVD-RAM and DVD-
RW discs written in the VR format. We refer
to such discs as a "VR format disc" in this
manual.
What You Cannot Do With
VR Format Discs
Note that the following operations cannot be
done with VR format discs:
• Resuming playback with the resume mode
set to "DISC RESUME"
• Advancing a still picture frame-by-frame
• Reverse slow motion playback
• Replaying the previous scenes (one touch
replay function)
• Locating a desired position by specifying
the time (time search)
NOTES: The RDV-1050 does not support
playback by play list.
There are two types of commercially
available DVD-RAM discs one with a car-
tridge and the other without a cartridge.
The RDV-1050 can play back DVD-RAM
discs without a cartridge, and discs with a
cartridge that can be removed from their
cartridge (Type 2 and Type 4).
Some discs may not play due to disc
characteristics or recording conditions.
23

Basic Operations

Original Playback
In original playback, contents on a VR format
disc are played back in the order the contents
are recorded.
When inserting a VR format disc, after the disc
contents are read, the original playback starts.
When the last title has been played back, the
unit stops playback automatically.
To stop in the middle of playback ■ (STOP)
. Playback is interrupted. If the resume
10
mode is set to "ON," the unit memorizes the
interrupted position.
NOTE: The "DISC RESUME" mode is not
available for VR format discs. Even if you
set RESUME to DISC RESUME, the resume
mode will be the same as when RESUME is
set to ON.
and numeric
To Resume Playback
Press
ON and an interrupted position is memorized,
playback restarts from the interrupted posi-
tion. If no interrupted position is memorized,
or RESUME is set to OFF, playback restarts from
the beginning of the title 1.
To Select the Next or Previous Title
in Stop Mode
Press
vious title will be selected. In this case, press
(SELECT) to start playback of the se-
29
lected title.
To Select the Next or Previous
Chapter/Title During Playback
Press
is divided into chapters) or to the next title.
Press
rent chapter/title.
Press
vious chapter/title.
Various Speed Playback
For Rapid Forward or Reverse
Playback
During playback, press
You can select from 1.5 times, 5 times, 20 times
and 60 times normal speed. When you se-
lect 1.5 times normal speed playback, the disc
is played back with sound.
(SELECT). If RESUME is set to
29
or
. The next or pre-
27
9
to skip to the next chapter (if a title
to return to the beginning of the cur-
repeatedly to skip back to the pre-
or
30
For forward or reverse playback at 5 times nor-
mal speed hold down
For forward play back in slow motion first press
II
(PAUSE)
to enter the pause mode, and
28
then press
. The forward slow motion play-
back will be activated. You can select from 1/
32 times, 1/16 times, 1/4 times and 1/2 times
normal speed.
NOTE: The actual playback speed may be
different from the speed shown on the TV
screen, depending on the recording condi-
tion.
To Start Playback of a Specific Title
Press the numeric buttons
ber of the title.
To Call Up the ORIGINAL
PROGRAM Display
During playback, press TOP MENU
ORIGINAL PROGRAM display appears on the
TV screen.
While the ORIGINAL PROGRAM display is shown,
you can perform the following operations.
• Start playback of a desired title by desig-
nating it using
/
NAL PROGRAM display.
• Go to the next title or return to the previ-
ous title by pressing
• Turn off the ORIGINAL PROGRAM display
by pressing TOP MENU (playback contin-
ues).
• Stop playback by pressing ■ (STOP)
(the ORIGINAL PROGRAM display disap-
pears).
.
11
English
or
.
27
9
to select the num-
4
. The
12
on the ORIGI-
32 14
or
.
27
9
10

Advertisement

Table of Contents
loading

Table of Contents