Troubleshooting - Bissell SPOTBOT PET 33N8 Series User Manual

Troubleshooting

Problem Possible causes
AUTOMATED CLEANING
Power cord not plugged in
SpotBot will
Blown fuse/tripped breaker
not run
Vacuum flex hose is not snapped
into place securely
Unusual or
Clean water/solution tank is
out of fluid
odd noise
Clean water/solution tank is out of fluid Fill clean water/solution tank
Clean water/solution tank is not
Reduce or
inserted into the unit securely
no spray
Deep Reach spray tips clogged
Tank is full
Dirty water/collection tank latch
No suction
is not down
Black valve on the dirty
water/collection tank is missing
MANUAL CLEANING
Power cord not plugged in
Blown fuse/tripped breaker
Cleaner will
Hose not removed from receiver
not run
SpotBot shut off automatically
during use
Unusual or
Clean water/solution tank is
out of fluid
odd noise
Spray tip clogged on Tough stain brush
Clean water/solution tank is out of fluid Fill clean water/solution tank
Reduce or
no spray
Clean water/solution tank is not
inserted into the unit securely
Tank is full
Dirty water/collection tank latch is
No suction
not down
Black valve on the dirty
water/collection tank is missing
Please do
not return
this product
to the store.
Other maintenance or service not included in the manual should
be performed by an authorized service representative.
Thank you for selecting a BISSELL product.
For any questions or concerns, BISSELL is happy to
be of service. Contact us directly at 1-800-237-7691.
WARNING
To reduce the risk of electric shock, turn power switch
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
Remedies
Check electrical plug
Replace household fuse or reset breaker
Check to make sure the vacuum flex
hose is snapped into place
Fill clean water/solution tank
Gently press the clean water/solution
tank until you see "bubbles" coming
from the base of the tank
Clean Deep Reach spray tips
Empty tank
Push latch down, securely into place
Replace black valve into dirty
water/collection tank
Check electrical plug
Replace household fuse or reset breaker
Remove hose
Press Pause/Resume button to
resume manual cleaning
Fill clean water/solution tank
Clean spray tip
Gently press the clean water/solution
tank until you see "bubbles" coming
from the base of the tank
Empty tank
Push latch down, securely into place
Replace black valve into dirty
water/collection tank
9