Assembly Guide - Merlin pilot 500 Instruction Manual

Assembly Guide

Your Merlin flight product requires a small amount of assembly before you can get started
1. Mounting the Wing:
The fuselage has all the electronics and linkages preinstalled leaving just the wing to be attached. Slide the wing onto the fuselage
leading (front) edge first so that the plastic tongue fits under the tongue holder on the fuselage.
Push down on the rear of the wing and it should sit into the wing recess of the fuselage. Screw the wing into place with the supplied
screw and driver, making sure it is secure.
2. Mounting the Undercarriage:
The undercarriage is in two parts, the nose leg and the main undercarriage. The nose leg push fits into the front slot on the
underside of the fuselage, just in front of the battery hatch. The main undercarriage push fits into the rear slot, just behind the
battery hatch. Squeezing the main undercarriage together allows for a good fitment.
3. Attaching the Propeller:
The Pilot 500 comes equipped with a simple "click" into place propeller mount. This system allows the propeller to detach in the
event of a crash and should save your propeller from all but the hardest crashes. Simply click the propeller into place giving it a
light tug to the front once mounted to make sure it is in place securely.
Your Pilot 500 is now fully assembled.
6