Chassis; Plug In Receiver Battery - Carson nitrobone Instruction Manual

Chassis

GB
Motor
Air filter
Rear shock unit
Muffler
Fuel-tank
Front tyre
Rear tyre
Receiver box
Throttle servo
Steering servo
Chassis
Front shock unit
a. Plug in receiver batteries
Insert 4 "AA" batteries into the receiver battery case as shown
Picture 1
(compare picture 1). Make sure positive (+) and negative (-)
ends are facing the correct direction. Then plug the pack into
the switch harness, inside the radio case. Black goes to black
and red goes to red. Replace the radio case cover.
Racer Tip: Use rechargeable batteries! They last longer and are
cheaper in the long run. Replace the 4 "AA" car batteries with
our NiMh 6V 1100mAh battery pack (608036 JR) (608037 BEC)
for longer life and economy.
10 CARSON Nitrobone RTR 103014