Lennox comfortsense 7500 User Manual page 7

I. Displays the current indoor temperature.
J. Indicates the schedule is on hold until the next
time period or permanent.
1. Place the schedule on hold by pressing on
either the heat-to or cool-to location on the
screen. If an adjustment is required for the
temperature setting, this can be done now.
2. To continue press twice on any blank area
of the screen.
3. From the override setting screen, the op­
tions are 1 hour, 2 hour or Permanent.
Make selection and then press set.
4. For the 1 or 2 hour setting the home screen
will indicate schedule hold until time indi­
cated (i.e., 11:57 pm). To exit schedule hold,
press Ⓧ.
5. For the permanent setting the screen will in­
dicate schedule hold permanent. To exit
schedule hold, press Ⓧ.
NOTE - When in any hold status, the mode
status area on the screen will go to the cur­
rent status mode. For example, from
schedule 1 to heat/cool.
K. System Status Icons - Equipment operation
information appears along the left side of the
home screen to indicate humidification, transi­
tioning operating mode, waiting (compressor
delay) emergency heat and transitioning next
schedule setting.
7