Lennox comfortsense 7500 User Manual page 6

Press the screen anywhere - the first press turns
on the backlight.
A. OPERATING MODE - press to access the
screen that will list available modes. Selectable
modes are heat/cool, heat only, cool only, off,
schedule 1, schedule 2, and schedule 3. In
addition fan operation can be set to on, auto or
circulate.
B. AWAY - Selecting AWAY will allow the user to
set the heating and/or cooling mode tempera­
tures when away from home.
Press cancel to exit this screen and return
to the home screen and normal system op­
erations.
cancel
C. Displays current time.
D. Menu - This will allow access to notifications,
performance report, schedules and set­
tings.
E. This allows you to set the heat-to (if enabled)
temperature. Selecting the heat-to or tempera­
ture dial position indicator will take you to the
temperature setting detail screen. The temper­
ature dial will change from white to red when
heating is active.
F. This allows you to set the cool-to (if enabled)
temperature. Selecting the cool-to or temper­
ature dial position indicator will take you to
the temperature setting detail screen. The dial
will change from white to blue when cooling is
active.
G. Indicates the current indoor humidity percent­
age in the home along with a humidity icon (rain
drop). The icon changes based on the humidity
level in the home as well.
H. This location could display the outdoor air tem­
perature. What is displayed in that location de­
pends on what sensor is installed and config­
ured through the thermostat user interface. If
neither is installed, then this area will be blank.
6