How Your Humidifier; Assembly; Works - Kenmore 758.15420011 Use & Care Manual

How Your Humidifier Works
Your new Kenmore humidifier is
designed to satisfy home humidity
requirements through the principle of
evaporation of water into the air.
After water is added to the bottle, the
filters begin to soak up the water and
become totally saturated in
approximately 30 minutes. Air is drawn
in from the rear of the humidifier and
through the filters by means of
circulation fans. As air passes through
the filters, moisture is absorbed into the
air and then released in the form of
vapor. No water droplets will enter the
home. All evaporation into the air takes
place in the humidifier, which means
that the residue left by evaporating
water is not passed into the home, but
remains in the filter.
Dry Air
Enters
Through
the Rear
Humidified Air is Then
Released Through the Top
!
CAUTION = To reduce the risk of
injury, fire or damage to
humidifier, use only cleaners
specifically recommended for
humidifiers. Never use flammable,
combustible or poisonous
materials to clean your humidifier.
To reduce the risk of scalds and
damage to humidifier, never put
hot water in humidifier.
Assembly
Your new Kenmore humidifier is
completely assembled for you to use.
Remove the bag pack containing two
plastic caster pads from top of
humidifier and retain for future use if
required. See the following Step 1 for
instructions.
Remove the packaging material from
inside your humidifier and follow the
instructions of this operator's manual for
proper usage. The packaging material is
located under the fan assembly. Remove
the packaging material and discard.
4