Symptom
No incoming ring
or alarm tone
The handset
switches off after
charging.
I cannot charge
the phone
I cannot connect
to other Bluetooth
devices
Solution
Hold the power key to check the phone is not
in silent mode.
Check the ringtone and ring volume settings.
The handset is charging in the off state. Press
and hold the Red key to switch the handset
ON.
Confirm the charger is properly inserted.
Remove the battery, clean the contacts and
check it is inserted correctly. The battery may
be worn out.
Tip: Charge the phone using the supplied USB
cable.
Turn Bluetooth on. Set visibility to Show. Make
sure the pass-code is correct. Possible
compatibility issues. Not all functionality is
supported between different Bluetooth
devices and standards.
62