Control Panel And Features - Maytag MVW18PDAXW Use And Care Manual

CONTROL PANEL AND FEATURES

1 WASH SELECTION BUTTONS
Use the Wash Selection buttons to select cycles on your
washer. See "Cycle Guide" for detailed descriptions of cycles.
Select the cycle most suitable for your load. Delicates will add
a low amount of water for smaller loads and Power Wash
add the most amount of water for large or bulky loads. Items
need to move freely. Tightly packing can lead to poor cleaning
performance and may increase wrinkling and tangling.
The washer is factory set for multiple progressive spray rinses.
In the Help Mode Sub Menu, changing from hf.LL to hf.-- will
change the rinse setting to a bath-type rinse, which should be
used when installing the optional Fabric Softener Dispenser.
2
OPTION SELECTION BUTTONS
TEMPERATURE senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric and soils
being washed. For best results and following the garment label
instructions, use the warmest wash water safe for your fabric.
• Warm and hot water may be cooler than your previous
washer.
• Even in a cold and cool water wash, some warm water may
be added to the washer to maintain a minimum temperature.
SOIL LEVEL selects the setting most suitable for your load.
NORMAL will add a normal amount of water for smaller loads
and HEAVY will add the most amount of water for large or bulky
loads. Items need to move freely. Tightly packing can lead to
poor cleaning performance, and may increase wrinkling and
tangling.
EXTRA RINSE adds another rinse to your selected cycle.
4
1
3 START BUTTON
Press to start the selected cycle. Press and hold
for 3 seconds to pause the cycle and unlock the lid.
Press and hold for 10 seconds to cancel a cycle.
NOTE: If the wash basket is spinning, it may take several
will
®
minutes to unlock the lid.
2 3