Audio Connections; Communications Connections - Meridian 586 User Manual

Audio connections

The following table gives details of the two alternative audio
outputs:
Use this output
DIGITAL OUT
ANALOGUE OUT
The digital connections should be made with high quality 75
screened cable. Suitable cables are available from Meridian. We
do not recommend using audio cables which do not have
adequate shielding or the correct impedance, or cables intended
for UHF applications, as these do not provide adequate
shielding in the 1–30MHz region.
56
To connect to this
A surround processor such as the
Meridian 565 Digital Surround
Processor, a digital preamplifier such
as the Meridian 562V, or Meridian DSP
loudspeakers.
A television, analogue preamplifier
such as the Meridian 502, or an
analogue surround processor such as
the Meridian 541 Surround Controller.
The analogue connections should be made using high-quality
screened cable, taking care to connect the left and right
channels correctly.

Communications connections

The following table gives details of the communications
connections:
Use this connection
COMMS
RS232 connection
To connect to this
Other Meridian 500 series
equipment, or Meridian DSP
loudspeakers.
For future expansion, to allow
the 586 to be interfaced to a
computer. Contact your dealer
for more information.