Configuring The 586 Dvd Player - Meridian 586 User Manual

Configuring the 586 DVD Player

To configure specific options
Switch off the 586, using the power switch on the back panel.
Switch on the power again while holding down the display key
on the front panel.
The display will show:
Press Display until the display shows the current value of the
option you want to change.
For example:
Press [ or ] to set the value you want.
When you have configured all the settings you want to change:
Switch off the 586, using the power switch on the back panel.
To change the video output format
You can change the active video output using the Video toggle
configuration option, enabling you to use the on-screen menus if
you do not have the Composite video output connected.
C onfig
This changes the active video output between S-Video and
COMPONENT video.
F an Au to
The display will show:
While in Config mode press Off.
V i d e o t o gg l e
49