Manufacturer's Plate - Mercury Roll Up 899197001 Owner's Manual

GENERAL INFORMATION

Manufacturer's Plate

The manufacturer's plate is located on the inside of the boat
transom.
b
a - Boat design category ‑ see following table
b - Certified Europe Insignia
c - Model number
d - Maximum load capacity ‑ people + outboard + fuel tank
and equipment
e - Maximum outboard weight
f - Pressure of the air chambers
g - Maximum outboard power
h - Maximum number of people
i - ISO 6185 part ‑ see following table
Boat design category ‑ The following table shows the navigation
use that the boat was designed and constructed for.
Boat Design Categories
A
B
a
h
i
Navigation
Ocean
Offshore
c
g
f
Wind Force and Wave Height
Designed for extended voyages
where conditions may exceed wind
force 8 (Beaufort scale) and wave
heights of 4 m (13 ft.) and above.
Designed for offshore voyages
where conditions may experience
wind force 8 (Beaufort scale) and
wave heights up to 4 m (13 ft.).
17
d
e
14598