To Return To A Previously Set Speed; Indicator Light; Turn Signal Control; Windshield Wiper/Washer Controls - Mercury Sable 2000 Owner's Manual

Controls and features
Pressing OFF will erase the
previously programmed set speed.

To return to a previously set speed

Press RES/RSM/RESUME. For
RES/RSM/RESUME to operate,
the vehicle speed must be faster
than 48 km/h (30 mph).

Indicator light

This light comes on when either the
SET ACC/SET ACCEL or RES/RSM/
RESUME controls are pressed. It
turns off when the speed control OFF control is pressed, the brake is
applied or the ignition is turned to the OFF position.

TURN SIGNAL CONTROL

Push down to activate the left
turn signal.
Push up to activate the right turn
signal.

WINDSHIELD WIPER/WASHER CONTROLS

Rotate the windshield wiper control
to the desired interval, low or high
speed position.
The bars of varying length are for
intermittent wipers. When in this
position rotate the control upward
for fast intervals and downward for
slow intervals.
46
OFF
ON
+
SET
RES
CST
CRUISE