Foglamp Control (If Equipped); Panel Dimmer Control; Autolamp Control (If Equipped) - Mercury Sable 2000 Owner's Manual

Foglamp control (if equipped)

The headlamp control also operates
the foglamps. The foglamps can be
turned on only when the headlamp
control is in the
the high beams are not turned on.
Pull headlamp control towards you
to turn foglamps on. The foglamp
indicator light

PANEL DIMMER CONTROL

Use to adjust the brightness of the
instrument panel during headlamp
and parklamp operation.
Rotate up to brighten.
Rotate down to dim.
Rotate to full up position (past
detent) to turn on interior lamps.
The dome lamp will not illuminate if the panel dimmer/dome lamp
control is switched to OFF.

AUTOLAMP CONTROL (IF EQUIPPED)

The autolamp system provides light
sensitive automatic on-off control of
the exterior lights normally
controlled by the headlamp control.
The autolamp system also keeps the
lights on for a fixed period of time
after the ignition switch is turned to
OFF.
To turn autolamps on, rotate the control counterclockwise.
To turn autolamps off, rotate the control clockwise to OFF.
position and
will illuminate.
Controls and features
A
A
A
17