Manual Override Controls - Mercury Sable 2000 Owner's Manual

Controls and features
The display will show and a bar
AUTO
graph to indicate manual fan
F
operation and relative speed.
FAN
• • •
To return to automatic fan operation, press AUTO.

Manual override controls

OUTSIDE
TEMP
OFF
MAX
F R
A/C
AUTO
TEMP
The override controls are located at the bottom of the EATC and allow
you to determine where airflow is directed. To return to full automatic
control, press AUTO.
The air conditioning compressor can operate in all modes except
and . It will also operate only when required when AUTO has been
selected. However, the air conditioning will only function if the outside
temperature is about 10°C (50°F) or higher.
Since the air conditioner removes considerable moisture from the air
during operation, it is normal if clear water drips on the ground under
the air conditioner drain while the system is working and even after you
have stopped the vehicle.
Under normal conditions, your vehicle's climate control system should be
left in any position other than MAX A/C or OFF when the vehicle is
parked. This allows the vehicle to "breathe" through the outside air inlet
duct.
25