Controls and features
Turning the EATC off
Press OFF. The Outside
OUTSIDE
TEMP
Temperature function will continue
OFF
to operate until the ignition is
MAX
turned off.
A/C
AUTO
TEMP
Automatic operation
Press AUTO and select the desired temperature. The selected
temperature and the word AUTO will appear in the display window. The
EATC system will either heat or cool to achieve the selected
temperature. The system will automatically determine fan speed, airflow
location and if outside air or recirculated air is required. Fan speed
remains automatic unless the fan speed control is pressed.
When in AUTO and weather conditions require heat, air will be sent to
the floor. However, if the engine is not warm enough to provide heat, the
fan will be at a low speed and the air will be directed to the windshield.
In 3
1
⁄
minutes or less, the fan speed will start to increase and the airflow
2
location will change to the floor area.
If unusual conditions exist (i.e.-window fogging, etc.), the manual
override controls allow you to select airflow locations and the fan control
allows you to adjust fan speed as necessary.
Temperature selection
The display window indicates the
AUTO
selected temperature, function
F
(AUTO or one of the override
controls) and manual control of fan
speed (
) if automatic fan speed
is not desired.
FAN
• • •
23