Advertisement
How to Use
NOTE: Ensure there are no grounds on the rim of the filter holder. This prevents a
proper seal from forming and may damage the machine.
1
Fill the removable water reservoir with
desired amount of cold water and
replace securely on the back of unit.
3
Place ground espresso holder into
filter holder. Add one tablespoon of
ground espresso for each cup being
made. Use shallow holder for 1 cup
and deep holder for 2 cups. Press
grounds firmly into holder with
tamping tool and ensure no grounds
remain on the rim.
6
2
Align raised dimple on the exterior of
espresso/pod filter holder with cutout
notch on inside of filter holder. Rotate
espresso/pod filter holder 180º to
secure in base.
OR
3
Place pod into filter holder. When
using an ESE (Easy Serving Espresso)
pod, always use the shallower espres-
so/pod filter holder. Never put two
pods in either filter holder at one time.
Advertisement
