When Adding Automatic Transaxle Fluid - Mercury Tracer 1997 Owner's Manual

4 Set the parking brake.
5. Remove the dipstick and wipe it
with a clean, dry rag.
6. Install the dipstick.
7. Remove the dipstick and inspect
the fluid level.
Your vehicle should not be
driven if the fluid level is
below the bottom hole in the
dipstick and outside
temperatures are above 10 °C
(50 °F).
When adding automatic
transaxle fluid:
• Ensure that the correct type is
added. For automatic transaxle
fluid specifications, refer to
Capacities and specifications
in this chapter.
Maintenance and care
20 C 65 C 65 C (149 F) 20 C 68 F) FAOZ
141