Epson wf-100 User Manual page 52

User's Guide
❏ Battery capacity of current: 1860 mAh (3.6 V)
Follow the instructions below to charge the battery from a computer.
1. Make sure that the computer is on. Wake the computer if it is in hibernate or sleep mode.
P
2. Press the button to turn on the printer.
3. Connect the printer to the computer using a micro USB cable.
Note:
You cannot charge the battery using a USB hub. Connect the printer directly to the computer.
P
4. Press the button to turn off the printer.
Note:
❏ If battery charging does not start, select Menu > Battery > Battery Settings on the control panel, enable USB Power
Supply via PC, and then try again.
❏ You can charge the battery when the printer is in sleep mode even if you do not turn off the printer.
❏ During charging, the computer recognizes the printer as a USB mass storage device.
❏ The battery charging light turns on when the battery is charging, and turns off when charging is complete.
Charging the Battery
52