Theft Indicator; Programming Spare Securilock Keys - Mercury 1999 Mountaineer Owner's Manual

Controls and features

Theft indicator

The theft indicator on the instrument cluster will operate as follows:
When the ignition is OFF, the theft indicator will flash briefly every 2
seconds to indicate the SecuriLock
vehicle.
When the ignition is turned to RUN or START, the theft indicator will
light for 3 seconds and then go out. If the theft indicator stays on for
an extended period of time or flashes rapidly, have the system
serviced by your dealership or a qualified technician.
Programming spare SecuriLock
Spare SecuriLock keys can be purchased from your dealership and
programmed to your SecuriLock
total of 8 keys). Your dealership can program your new SecuriLock
key(s) to your vehicle or you can do it yourself using the following
simple procedure. To program a new SecuriLock
need two previously programmed SecuriLock
operate your vehicle's engine). If two previously programmed
SecuriLock keys are not available (one or both of your original keys
were lost or stolen), you must bring your vehicle to your dealership to
have the spare SecuriLock
114
system is protecting your
keys
passive anti-theft system (up to a
key yourself, you will
keys (keys that already
key(s) programmed.