Carton Contents EasiCut 420/450/510 Handguard blade cover instruction manual belt clip EasiCut 600XT Handguard blade cover instruction manual belt clip IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd.
Page 3
b) Do not operate power tools in explosive 4) Power tool use and care atmospheres, such as in the presence of a) Do not force the power tool. Use the correct flammable liquids, gases or dust. Power tools power tool for your application. The correct create sparks which may ignite the dust or fumes.
Page 4
Do not repair a damaged Check immediately. Excessive vibration can cause cable, replace it with a new one. Use only Flymo injury. replacement cable. before passing to another person.
Assembly Assembly of Handguard. Insert Handguard into slot as illustrated in figure A, ensuring that it is securely located. DO NOT USE THE PRODUCT WITHOUT FITTING THE HANDGUARD Before Use your belt (B3) Before starting your hedge trimmer. 4. Form a loop in the mains cable and push the loop •...
To start your hedge trimmer To start, push forward the lock-off button (G1), squeeze the main switch lever (G2), release lock-off EasiCut 420/450/510 button. There are three switch levers fitted to your Hed- Main switch lever (G2) and one other need to be getrimmer.
3. Pre-packed spares are available from most Flymo Service Centre will require proof of purchase. Approved stockists. All of the centres listed stock genuine Flymo Spare Parts. 4. Your product is uniquely identified by a silver and NOTE: Our Service Repairers act on their own behalf...
EC Declaration of Conformity Husqvarna UK Ltd., Aycliffe Industrial Park Newton Aycliffe, Co. Durham, DL5 6UP, England Declare under our sole responsibility that the product(s); Category......Hedgetrimmer Type(s) ......EC420, EC450, EC510, EC600 Identification of Series..See Product Rating Label Year of Construction..See Product Rating Label Conforms to the essential requirements &...