Flymo EasiCut 420 Original Instructions

5054534-06 Easicut 420-450-510-600XT UK.qxp_Layout 2 14/12/2015 13:33 Page 1
Service Recommendations
1. We strongly recommend that your product is serviced
at least every twelve months, more often in a profes-
sional application.
2. Always use genuine Flymo Spare Parts.
3. Pre-packed spares are available from most Flymo Ap-
proved stockists.
4. Your product is uniquely identified by a silver and
black product rating label
5. If you have a problem with your machine contact your
local Approved Service Centre ensuring you have full
details of your product as described on the product rat-
ing label. EC Declaration of Conformity
Husqvarna AB, S-561 82 Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Designation............................Hedgetrimmer
Designation of Type(s)...........EC420, EC450, EC500, EC510, EC600
Identification of Series...........See Product Rating Label
Year of Construction..............See Product Rating Label
Conforms to the essential requirements & provisions of the following EC Directives:
2006/42/EC, 2004/108/EC, 2000/14/EC, 2011/65/EU
based on the following EU harmonized standards applied:
EN60745-1, EN60745-2-15
The maximum A weighted sound pressure level L
given in the table.
The maximum hand / arm vibration weighted value a
above product(s) is given in the table
The declared vibration tool value has been measured in accordance with a standard test method and may be used
for comparing one tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning:
The vibration emission during actual use of the power tool can differ from the declared total value depending on the
ways in which the tool is used.
Operators should identify safety measures to protect themselves that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched
off and when it is running idle in addition to the trigger time).
2000/14/EC: The Measured Sound Power L
figures. WA
Conformity Assessment Procedure...............
Huskvarna
17/01/2013
P . Lameli
Chief Technical Officer
Keeper of technical documentation
Type
Blade length (cm)
Power (kW)
Measured Sound Power L (dB(A))
WA
Guaranteed Sound Power L (dB(A))
WA
Sound Pressure L (dB(A))
pA
Uncertainty K (dB(A))
pA
Hand / arm vibration a (m/s )
2
h
Uncertainty K (m/s )
2
ah
Weight (Kg)
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Copyright © 2015 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered trademarks
5054534-06
6. Should it be necessary for work to be carried out by your Serv-
ice Centre, it is important to take your complete machine in-
cluding cable and any extension cables used.
A network of specialist dealers can be found in your local Yel-
low Pages. To obtain service on your product simply tele-
phone or visit your local Service Centre. Should you require
service under the terms of our guarantee the Service Centre
will require proof of purchase.
All of the centres listed stock genuine Flymo Spare Parts.
NOTE: Our Service Repairers act on their own behalf and are
not empowered to commit or legally bind Husqvarna UK Ltd.
in any manner whatsoever.
at the workstation, measured according to EN60745-2-15 is
pA
, measured according to EN60745-2-15, on a sample of the
h
& Guaranteed Sound Power L values are according to the tabulated
WA
Annex V
EC420 EC450 EC500 EC510
42 45 50 51
0.42 0.45 0.50 0.50
97 97 99 99
99 106 106
104
86 86 88
88
2.5
2.5 2.5 2.5
2.23
5.56 5.53 5.22
1.5 1.5 1.5
1.5
2.8
2.8 2.8 2.9
Husqvarna AB
S-561 82
Huskvarna
Sweden
of Flymo S.A.
12/15
EasiCut 420/450/500/510
EasiCut 600XT
EC600
60
0.50
96
97
85
2.5
3.30
1.5
3.0
EasiCut 420/EasiCut 450/
EasiCut 500/EasiCut 510
®
EasiCut 600XT
Original Instructions
Please register your
product warranty on line.
To register your warranty and for all
your parts requirements please visit
www.flymo.com
For all other enquiries
0344 844 4558 1800 882 350