Subscribe to Our Youtube Channel
Related Manuals for Rosewill RX200R-APU3-25B
Summary of Contents for Rosewill RX200R-APU3-25B
- Page 2 Foreword Congratulations on your purchase of our product ! Before using the product, please read this manual carefully for further recognizing of the product. I. System Requirement Basic enviroment for using this device: Hardware requirement : A PC, Notebook with free USB and port Operation system : windows XP/Vista/7/8 II.
- Page 3 ◇One 2.5" two bay USB3.0 Enclosure ◇One USB3.0 Connecting cable ◇One User’s Manual ◇One 5V Adapter ◇One CD driver ◇One Stand IV. Hardware Installation...
- Page 4 1. Push switch on the handle toward the right to open the door 2. Put SATA HDD into enclosure (HDD’s SATA connector toward the inside of the product) 3. Close the door, handle will be locked automatically 4. HDD installation finished...
- Page 5 V. Hardware setup and under WIN XP/VISTA/7/8 use : There have mode which in the rear back of the product, it can form 4 kinds of different ways through mode switch, it can realize 4 kinds of different functions as below : RAID1 RAID0 JBOD...
- Page 6 Capacity is Drive A plus Virtual JBOD volume Drive B Port 0 Port 1 Drive A Drive B Connect the USB cable to PC and enclosure USB host, then open the power Select[Start]-[My Computer]-[Manager] as below : In the left window, select [System Tools] – [Device Manager] as below :...
- Page 7 The two External hard disk oicon will appear at the window under the system hard disk icon Right click the two icon of the two external hard disk, delete all disk partition, make this two disk become one JBOD disk.
- Page 8 Display one disk and others system disk capacity as below : Right click the new hard disk icon, make based new partition display as below :...
- Page 9 Next new partition wizard : A window will disappear and ask to select partition type [primary partition] or [Extended partition] as below.
- Page 10 Select [Extended partition] to continue Display the hard disk partition size, click [Next] to continue...
- Page 11 Next completing the new partition wizard. Click « finish » Extended partition finished.
- Page 12 Now we need to make it to new local drive, follow the step as below : Next New Partition wizard, local drive will build.
- Page 13 Next setup local drive size, no more than extended partition size. We select 800 000 Mo. Next assign the following drive letter "J :"...
- Page 14 Next format this partition with the following settings. Select perform a quick forma assign "V" Next display finish as below :...
- Page 15 Click "finish", began to formatting your Disk size. Complete formatted this disk size display as below : You can continue partition and format the other disk...
- Page 16 When finish this step, a new total disk will display at the right window as below : 2. 2LUN Function Mode Please move Mode Selective Swich till the position that just under 2LUN mark. Connect power supply with product properly (Not allowed to connect USB3.0 Cable at the same time), Hold RESET button, And power on product, After holding button with continuous 5 seconds, P{roduct will switch to 2LUN, Connect...
- Page 17 Power on the enclosure, then this two HDD icon will be display in the [Disk Manager] window as below. Repeat the same step [Delete Partition]—[New Partition]—[New Logical Drive] to this two disk.
- Page 18 When finish this Step, the two disk will show [Healthy] at the [Disk Manager] window as below, now y ou can use it. 3. RAID0 Function Mode. Please move Mode Selective Switch till the position that just under RAID0 mark. Connect power supply with product properly (Not allowed to connect USB3.0 Cable at the same time), Hold RESET button, and power on product, After holding button with continuous 5 seconds Product will switch to RAID0,...
- Page 19 Capacity is Drive A plus Drive B Port0 Port1 Drive A Drive B Striping across disks Under RAID0 mode, it will display 2x HDD capacity, if two HDD capacity are 120GB, so it show 240GB ;if one HDD capacity is 120GB, and other is 500GB, it will show 120x2=240GB Power on the enclosure, then on disk icon will be display in the [Disk Manager] window as below.
- Page 20 Right Click the Disk1 icon, run the same process : [Delete Partition]-[New Partition]-[New Logical Disk]. When finish this step, the disk1 will show [Healthy] at the [Disk Manager] window as below, now you can use it. 4. Raid1 Function MOde Please move Mode Selective Switch till the position that just under RAID1 mark.
- Page 21 If one drive fails, the RAID1 volume is still usable, but is in a vulnerable state because its mirrored hard drive is inaccessible. When the offline drive comes back online, the appliance begins a brebuild process immediately to restore data redundancy. Capacity is the Capacity is the Virtual Raid1...
- Page 22 Power on the enclosure, then on disk icon will display in[Disk Manager] window as below..
- Page 23 NOTE : ● Do not shake the enclosure when it is working ● Before change the hard drive storage policy, please make sure and backup all files in the hard drive before setup, all the existent partition will be deleted.
- Page 24 VI. Backup software installation and usage A. Vbackup software installation 1. Open the folder [PCCLONEEX_LITE] and double click [Setup], the below window will appear : 2. Click[Agree] to accept the license agreement...
- Page 25 3. Click [Install] enter next step 4. Click [OK] to finish installation...
- Page 26 B. Use backup function 1. After finishing installation, an icon will appear on desktop, double click [PCCloneEX], the below window will appear :...
- Page 27 2. Press the backup button, program will appear [Please select file(s)], click [OK] 3. Please select the file(s) which you want to backup in the left window, then press the button again.
- Page 28 4. Follow the instruction to press the button again or lick [Start] with mouse. 5. System Start to backup the file(s) which you have selected, when finish, there will display [Backup finished], click [OK]...
- Page 29 6. Backup file finished now you may check the file on right window VII. Remove a external enclosure Warning : Before removing the USB cable, you must finish the following procedure : 1). Click icon at the tool bar of your system 2).
- Page 30 * Format a new Hard Disk Drive If new Hard Disk Drive, you need to partition and format it before using. Please follow the steps below to format new Hard Disk Drive : 1) Right click [My Computer], and select [Manager] 2) System will display a «...
Need help?
Do you have a question about the RX200R-APU3-25B and is the answer not in the manual?
Questions and answers