Rosewill RX81US-HT35A-BLK User Manual
Rosewill RX81US-HT35A-BLK User Manual

Rosewill RX81US-HT35A-BLK User Manual

External enclosure for 3.5" sata to usb + esata

Advertisement

Quick Links

External Enclosure for
3.5" SATA to USB + eSATA
RX81US-HT35A-BLK
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RX81US-HT35A-BLK and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Rosewill RX81US-HT35A-BLK

  • Page 1 External Enclosure for 3.5" SATA to USB + eSATA RX81US-HT35A-BLK User Manual...
  • Page 2: System Requirement

    External Enclosure For 3.5” SATA to USB + eSATA User Manual Please read this installation carefully before you use the products. Precaution: • If it is a new HDD, needs to processing the disk partition • Win98SE and WinME do not recognize NTFS formatted drives, so if you want to use your drive on those platforms, we recommend you to use FAT32 instead.
  • Page 3: Package Contents

    External Enclosure For 3.5” SATA to USB + eSATA User Manual 2.2 Over Voltage (OV) Protection If an over-voltage fault occurs on the adapter output, the power will shutdown. 2.3 Short Circuit Protection The power will protect itself, and shut down, if a short circuit is placed between DC return and the output.
  • Page 4: Technical Specifications

    External Enclosure For 3.5” SATA to USB + eSATA User Manual Technical Specifications Bus Interfaces: USB v 2.0 / eSATA USB 2.0 = 480 Mbps Data Speeds eSATA = 3.0 Gbps (NCQ Support) Connectors USB B receptacle / eSATA connectors Compliant with SATA I / II with NCQ SATA Standard support...
  • Page 5: Installation Guide

    External Enclosure For 3.5” SATA to USB + eSATA User Manual Installation Guide 1. Release the screws (rear side) to pull out the HDD frame. 2. Located the HDD with the power & data connecter 3. Fasten the HDD by screws. 4.
  • Page 6: Driver Installation

    External Enclosure For 3.5” SATA to USB + eSATA User Manual Attention • Only one interface at one time can be used. • If this HDD is new one, please partition & format disk. Otherwise the system cannot detect HDD. •...
  • Page 7 External Enclosure For 3.5” SATA to USB + eSATA User Manual The divided partition of the external HDD Win 98SE/ME SYSTEM FDISK is command that doing the divided partition to HDD, The steps of how to divided partition from the HDD by using FDISK as follows: •...
  • Page 8 External Enclosure For 3.5” SATA to USB + eSATA User Manual • Select “Disk Utilities” in the utilities folder. • Choose your external drive and format it. Notice: If you want your ENCLOSURE on a Windows as well as on your Mac OS, we recommend you to use a PC to format the drive.
  • Page 9 If you can not see the drive, make sure the jumper settings of your hard drive is “master”. Thank you for purchasing a quality Rosewill Product. Please register your product at : www.rosewill.com for complete warranty information and future support for your product.

Table of Contents