Rosewill RX81US-HT-25A-BLK User Manual
Rosewill RX81US-HT-25A-BLK User Manual

Rosewill RX81US-HT-25A-BLK User Manual

External enclosure for 2.5" sata to usb + esata

Advertisement

Quick Links

External Enclosure for
2.5" SATA to USB + eSATA
RX81US-HT-25A-BLK
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RX81US-HT-25A-BLK and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Rosewill RX81US-HT-25A-BLK

  • Page 1 External Enclosure for 2.5" SATA to USB + eSATA RX81US-HT-25A-BLK User Manual...
  • Page 2: System Requirement

    External Enclosure for 2.5” SATA to USB + eSATA Please read this installation carefully before you use the products. Precaution: If it is a new HDD, needs to processing the disk partition Win98SE and WinME do not recognize NTFS formatted drives, so if you want to use your drive on those platforms, we recommend you to use FAT32 instead.
  • Page 3 External Enclosure for 2.5” SATA to USB + eSATA Feature • Standard USB 2.0 high speed transfer rate. • Support Serial ATA. (USB + eSATA). • eSATA transfer rate up to 3.0Gbps(NCQ support) • Suitable for 2.5" HDD. • All aluminum, to enhance heat dissipation. •...
  • Page 4: Installation Guide

    External Enclosure for 2.5” SATA to USB + eSATA User Manual Installation Guide 1. Release the screws to pull out the HDD frame. 2. Fix the HDD by screws (after HDD located with the connecter). 3. Pull in the frame into external box. 4.
  • Page 5: Driver Installation

    External Enclosure for 2.5” SATA to USB + eSATA Attention • Only one interface at the time can be used(combo model) • If this HDD is new one, please partition & format disk, otherwise the system cannot detect HDD. • The HDD jumper should be set to “master”.
  • Page 6 External Enclosure for 2.5” SATA to USB + eSATA The divided partition of the external HDD Win 98SE/ME SYSTEM FDISK is command that doing the divided partition to HDD, The step of how to divided partition from the HDD by using FDISK as follows: Plug the cable of USB into PC, and be sure that the PC has identified HDD.
  • Page 7 External Enclosure for 2.5” SATA to USB + eSATA Notice: If you want your ENCLOSURE on a Windows as well as on your Mac OS, we recommend you to use a PC to format the drive. Choose FAT32 format and do not change anything on the partition or format on your Mac, otherwise the Windows OS can not be able to recognize the ENCLOSURE.
  • Page 8 If you can not see the drive, make sure the jumper settings of your hard drive is “master”. Thank you for purchasing a quality Rosewill Product. Please register your product at : www.rosewill.com for complete warranty information and future support for your product. User Manual...

Table of Contents