Table of Contents
Advertisement
2. Specification
PSZ2610
Overall size (L x W x H) ..............2085 x 250 x 310mm
Dry weight ........................................................... 5.5kg
Engine Type .................. Air-cooled 2-stroke gasoline
Model.................................... Zenoah GZ25N
Displacement .................................. 25.4cm
Max. output . 1.2Hp (0.9kW) at 7500min-1(rpm)
Idle speed ................... 3000±200min-1(rpm)
Fuel ................... Mixture (Gasoline 50 : Oil 1)
(when using ZENOAH genuine oil)
Carburetor .............. Walbro Diaphragm type
Spark plug ................................ NGK CMR7H
Fuel tank capacity ............................................... 0.65
Transmission ........ Centrifugal clutch, Rigid driveshaft
Reduction ratio .................................................... 0.94
3. Warning labels on the machine
(1) Read owner's manual before operating this
machine.
(2) Wear head, eye and ear protection.
(3) Warning/Attention
(4) The unit has not been designed to provide pro-
tection from electric shock in the event of con-
tact with overhead electric lines.
4. Symbols on the machine
For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications,
please be careful not to make a mistake.
The port to refuel the "MIX GASOLINE"
Position: FUEL TANK CAP
The direction to close the choke
Position: AIR CLEANER COVER
The direction to open the choke
Position: AIR CLEANER COVER
MIN
MAX
If you turn the rod by screwdriver follow the arrow to the "MAX" position, the chain oil flow more,
and if you turn to the "MIN" position, less.
Position: Bottom of the TRANSMISSION
Cutting head
Guide bar Type ............. OREGON DOUBLE GUARD
Size .................................... 10(25) in.(cm)
Saw chain Type .......................... OREGON 90SG39X
Pitch x Gauge . 3/8x0.043 (9.53 x 1.07) in.(cm)
3
Sprocket ................................................................. 7T
Oil pump ..................................................Plunger type
Standard Accessories
Harness .............................................................. 1 pc.
Tool Kit ................................................................ 1 pc.
Guide bar cover .................................................. 1 pc.
Goggles .............................................................. 1 pc.
Specifications are subject to change without notice.
If warning label peels off or becomes soiled
and impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the re-
quired location(s).
Never modify your machine.
We won't warrant the machine, if you use
the remodeled pruner or if you don't observe
the proper usage written in the manual.
PSZ2610
G
B
GB-3
Advertisement
Table of Contents
