Inspect Water Connection / Supply - Samsung RS261M Repair Manual

Tip 3-1. Inspect WATER connection / supply
Check Point
※ Need lever operation for 3 min on initial and after filter
replacement !
Step 1
① Inspect lever water coming after Water
selecting.
※ Takes water tank filling time of initial product
- When the water does not come  Check Step
2
- When the water comes  Check TIP 2-4
Step 2 (Connection problem-Hose bending)
① Inspect external tap and product connection
condition
- Inspect the water pipe is not connected
- Inspect the tap is closed.
② Inspect backside Water Hose bending.
Step 3 (Piercing Valve using problem)
① Check the water supplying when use Piercing
Valve.
※ Check water supplying after disassemble
refrigerator hose
Step 4 (CASE WATER Filter problem)
① When remove Water Filter water supplies,
when connect it water does not come.
※ When the other filter replace, and same
symptom appear, Replace case water filter.
※ Check Filter & Water tank freezing when Too
Cold
① Replace filter for long term using FILTER
Step 5 (Water pressure problem)
① If the water supplies well through water line,
check water pressure can be decreased when
the external Water Filter using.
※ Supply water should be at least over
20PSI.
Inspect Water supply failure
- 18/47 -
Piercing Valve
Freeze the filter & tank