Tip 2-2. Inspect Ice Valve operation
Check Point
Step 1
①
Push the button for 2 sec which is on the
bottom of ice maker after disassemble Ice
Bucket.
②
Check the water supplying after ice maker
tray twist operation.
- When the water does not come Check
the Step 2
- When the water comes Check TIP 2-5
Step 2
①
Disassemble the backside Unit Cover .
②
Check Purple 2-Wire after disassemble ASSY
Valve
- Normal part: 350~450 Ω
- Failure part : Open or 0 Ω
③
Disassemble the Main PBA Cover which is on
the back
④
Inspect Connector which is on right bottom
- Inspect CN70 No.3(RED)and CN73
No.7(PRP)
Inspect ice maker Water supplying problem
CN 73
CN 70
①
①
- 8/47 -
점ㄱ
Disassemble Unit Cover 2-
inspect Wire
CN 73 No.7(PRP) + CN70
No. 3(RED)