Installing The Stand - Hisense 58K700UWD Quick Setup Manual

Installing the Stand

CAUTION
Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount
brackets.
The LED display is very fragile, and must be protected at all times when installing the base
stand. Be sure that no hard or sharp object, or anything that could scratch or damage the
LED display, comes into contact with it. DO NOT exert pressure on the front of the TV at any
time because the screen could crack.
Follow the illustrations and textual instructions below to complete the installa-
tion steps:
1. Carefully place your TV face-down on a soft, flat surface to prevent damage to the
TV or scratching to the screen.
2. Secure the stand cover to the TV with the 4 screws provided.
NOTE
Product images are only for reference, actual product may vary in appearance.
Installing the Stand
M4×12 (58")
M5×12 (65")
2
BASE STAND