Turning The Tv On For The First Time - Hisense 58K700UWD Quick Setup Manual

Turning the TV on for the First Time

1. Connect the mains cable to the mains socket after you have completed all the
connections.
2. The first time you turn the TV on, it will go straight into the Installation Guide. It will
assist you to specify the Language, Location, Time Zone, Mode, EULA, Network
and Input.
3. Press the [ / / < / >] to navigate the menu and change the settings. Press the [OK]
button to confirm.
Language
Location
Time Zone
Mode
EULA
Network
Input
Complete
Turning the TV on for the First Time
Select your desired language to be displayed on the menu.
Select the country where you will operate the TV.
Select your location time zone.
Next, navigate to the Forward arrow and press [OK] button.
Select Home Mode and then navigate to the Forward arrow to
press [OK] button.
Note: 'Store mode' should only be selected by Retailers who
plan to demonstrate the TV.
Accept EULA
Help promote the TV user experience.
If your TV does not automatically detect an Ethernet connection,
then select Wireless. When you're done, select your network
from the list that displays and move to the next screen.
Select how you receive your TV channels. Choose from one of
the following sources below and then move to the next screen.
• TV
• AV
• COMPONENT
• HDMI
Note: If you use an antenna to receive channels, then you must
complete the first-time setup menu in order to run a channel
scan.
Congratulations! Your TV is now ready to use.
Press [OK] on your remote if you are fine with the selections.
Otherwise, navigate to the back arrow on the screen to change
your selection.
14