Safety Instructions - Pro-Ject Audio Systems power box ds User Manual

Dear music lover,

Thank you for purchasing a Pro-Ject Audio Systems Power Box DS Amp.

In order to achieve maximum performance and reliability you should study these instructions for use carefully.

Warning of a hazard for the user, the unit or possible misuse

Important notice

Safety instructions

AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the

voltage in your area meets the voltage requirements printed on the device.

Never handle the device while your hands are wet or damp. Avoid letting liquids enter the device.

Never place any item containing liquid, such as a flower vase on or near the device. Never spill any

liquid on the device. Never place any naked flame sources, such as lighted candles on or near the device.

The product shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any

other similar conditions.

Using the product

Power Box DS Amp is designed to power Pro-Ject amplifiers which require a 2x48V DC power supply.

Make all connections whilst the Power Box DS Amp is switched off or disconnected from the mains.

Power Box DS Amp is designed for Amp Box DS, Amp Box DS mono (RS line power amplifiers also

will work). Interconnection cables are included in the packaging. Original power supply of the

amplifier is not needed.

Pro-Ject Power Box DS Amp can power one stereo amplifier or two mono amplifiers.

Connection of two stereo amplifiers can overload and damage the unit.