Advertisement
Trigger connection
Power Box DS Amp is equipped with 12V trigger-out socket (jack 2.5mm) to turn on/off a Pro-Ject product with
trigger input socket.
!
Do not use the trigger output for any other connections for which it is not designed.
Main power switch
The toggle switch turns the unit on or off. The blue LED above the switch shows that the unit is switched on.
Technical specifications Pro-Ject Power Box DS Amp
Output voltage / current:
Dimensions W x H x D:
Weight:
Service
Should you encounter a problem which you are not able to alleviate or identify despite the above information,
please contact your dealer for further advice. Only when the problem cannot be resolved there should the
unit be sent to the responsible distributor in your country.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or change to any part of the product by unauthorized persons, release the
manufacturer from any liability over and above the lawful rights of the customer.
Copyright, trademarks
Pro-Ject Audio Systems is a Registered Trademark of
H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems
Copyright
©
2015. All rights reserved.
2x (2x48V) / 2,5A
203 x 72 x 207 mm
4200 g
© Pro-Ject Audio Systems · Pro-Ject Power Box DS Amp · Revision 2015.7.21
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.
3
Advertisement
