Mercedes-Benz C-CLASS WAGON C 240 Operator's Manual page 82

Safety and Security
Occupant safety
Securely fasten hook 2, which is part
of the tether strap, to anchorage
ring 1.
1 Anchorage ring
2 Hook
Once the top tether anchorage hook is
attached, the child restraint itself can be
secured. Tighten the top tether strap
according to the child restraint
manufacturer's instructions.
i
For safety, make sure the hook 2 has
attached to the ring 1 beyond the
safety catch, as illustrated.
80
Child seat anchors – LATCH-type
This vehicle is equipped with two LATCH-
(Lower Anchors and Tethers for CHildren)
type anchors (at each of the outer rear
seats) for the installation of a LATCH-type
child seat with the matching mounting
fittings.
To fold anchors out
The foldable LATCH-type anchors are
located between the seat cushion and the
backrest.
1 Anchors
2 Button
Grip inner side of anchors 1 and fold
forward until they audibly lock in place.
Install child seat according to the
manufacturer's instructions.
i
If a child seat is not installed, the
LATCH-type anchors can be folded
back between the seat cushion and the
backrest ( page 81).
i
The child seat must be firmly attached
in the right and left side anchors 1.
With a child seat installed in the left
rear seat, the seat belt for the center
seat occupied by a passenger must op-
erate freely. Guide seat belt between
its seat cushion mount and backrest
mount along outside of right side child
seat anchor.