Mercedes-Benz C-CLASS WAGON C 240 Operator's Manual page 152

Controls in detail
Control system
Setting daytime running lamp mode
(USA only)
i
This function is not available in
countries where the daytime running
lamp mode is mandatory and therefore
in a constant mode.
Move the selection marker with
button æ or ç to the
submenu.
Press button j or k repeatedly
until the message Hdlamp mode
in the multifunction display.
150
The selection marker is on the current
setting.
Lighting
Press button æ or ç to select
manual operation (
appears
running lamp mode (
activated.
With daytime running lamp mode activated
and the exterior lamp switch in
position M or U, the low beam
headlamps are switched on when the
engine is running.
In low ambient light conditions the
following lamps will switch on additionally:
Parking lamps
Tail lamps
License plate lamps
Side marker lamps
For more information on the daytime
running lamp mode, see "Lighting"
( page 116).
i
For safety reasons, resetting the
Manual ) or daytime
Constant ) Lighting
( page 141) while driving will not
deactivate the daytime running lamp
mode.
The following message appears in the
multifunction display:
Lighting - Cannot be completely
reset to factory sets. while
driving.
submenu to factory settings