Steer Page - Lowrance HDS Gen2 Touch Operator's Manual

Data fields
Off course limit
40 |

Steer page

The Steer page can be used to display information when you are
navigating.
Data fields
The Steer page displays the following information:
DTD Distance to destination
XTE Cross track error
SOG Speed over ground
TTD Time to destination
COG Course over ground
POS Position
The course line
When traveling on a route the course line shows the intended
course from one waypoint towards the next. When navigating
towards a waypoint (cursor position, MOB or an entered lat/lon
position), the course line will show the intended course from the
point at which navigation was started towards the next waypoint.
Vessel symbol
The vessel symbol indicates distance and bearing relative to the
intended course.
Off course limit
If the XTE exceeds the defined off course limit this will be indicated
with a red arrow including the distance from the track line.
If the off course alarm is enabled, the alarm will activate if the XTE
exceeds the defined off course
Navigating | Lowrance HDS Gen2 Touch
Vessel symbol
limit.
Course line