The Ecor-Pro dehumidifier is a large capacity unit designed to run highly ef- • Any service other than regular cleaning or filter replacement should be performed by an authorized service representative.
The dried air then passes through a final heat exchanger where it is warmed Your Ecor-Pro dehumidifier can be installed in any area with a too high relative before it re-enters the room area at a slightly elevated temperature. The level humidity, such as cellar, playing area, shed, archive or swimming pool.
Secure all 4 fixings. Wall-mounting brackets are provided with your Ecor-Pro dehumidifier. Fix the support brackets with at least 6 screws to the wall, use the appropriate fixings for the weight of the unit and the type of wall, ensure the screw heads pro- trude by no more than 3.5mm as this will interfere with...
Page 5
CLEANING CONTROLS Disconnect from the mains before cleaning the unit or any of its components. Your Ecor-Pro dehumidifier features a microprocessor based digital control Cleaning the air filter system for optimal performance control. Air circulation is impeded and the efficiency of the dehumidifying and air pu- All functions are accessible via the membrane keypad shown below: rifying functions decreases when the filter is dirty.
TECHNICAL DATA IMPORTANT: This dehumidifier should not be used in temperatures below 7°C or above 35°C. Specifications DH1100 Defrost Control The dehumidifier is equipped with an automatic de-icing mode to defrost Typical Extraction @ 32 C 90%rh 81 l /day the refrigeration coil during low temperature operation.
Need help?
Do you have a question about the DH1100 and is the answer not in the manual?
Questions and answers