7.4 Access to the Control System
7.4.1 Removing the control box
1. Carry out step 7.1.1;
2. Disconnect the electrodes wires
(Fig. 68);
7.4.2 Removing the electrical box
1. Carry out step 7.1.1;
2. Disconnect the fan and air pres-
sure switch wires (Fig. 71 & 72);
5. Remove the two screws R3 below the appliance and pull the control box
towards you (Fig. 75 & 76)
6. Reassemble in reverse order.
R3
3. Remove the gas valve wires
(Fig. 69);
F
. 68
IG
3. Remove connections on the
control box (Fig. 73);
F
. 71
IG
F
. 72
IG
F
. 75
IG
F
. 69
IG
F
. 73
IG
R3
F
. 76
IG
26
4. Remove the screws R1 & R2
and pull the control box towards
you (Fig. 70)
5. Reassemble in reverse order.
R1
R2
4. Remove the screw R1 to free the
earth connections (Fig. 74);
R1
Fig. 70
F
. 74
IG