7.2 Access to the Combustion Chamber
7.2.1 Removing the burner box
1. Carry out step 7.1.1;
2. Remove the two clips, one on either side of the burner box (Fig. 31 & 32);
B
7.2.2 Removing the electrodes
1. Carry out step 7.1.1 and 7.2.1;
2. Disconnect the electrodes wire
(Fig. 34);
F
. 31
IG
3. Remove the screw C from the
manifold (Fig. 35);
F
. 34
IG
B
F
. 32
IG
C
F
. 35
IG
21
4. Pull the burner box towards you
(Fig. 33).
5. Reassemble in reverse order.
4. Pull the electrodes towards you
(Fig. 36).
5. Reassemble in reverse order.
F
. 33
IG
F
. 36
IG