Vehicle status messages have been
recorded
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction dis-
play:
Press button k or j.
The stored messages will now be dis-
played in the order in which they have
occurred. For malfunction and warning
messages, see "Vehicle status messag-
es in the multifunction display"
( page 394).
Should the vehicle's system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display when the SmartKey in the
starter switch is turned to position 0 or
removed from the starter switch.
i
The vehicle status message memory will be
cleared when you turn the SmartKey in the start-
er switch to position 1 or 2. You will then only
see high-priority messages in the multifunction
display ( page 394).
Controls in detail
Control system
Settings menu
In the
Settings
menu there are two func-
tions:
The function
To reset: Press reset
button for 3 seconds
, with which you
can reset all the settings to the original
factory settings.
A collection of submenus with which
you can make individual settings for
your vehicle.
Press button è or ÿ repeatedly
until the
Settings
menu is seen in the
multifunction display.
169