Mercedes-Benz 2007 E -Class Wagon Operator's Manual page 136

Before folding out the seat backrest, you
must:
fold the rear seat backrests into an up-
right position and lock them into place
move the handle for the twin roller
blind into the upper position
i
The rear seat backrests can be adjusted to a
more reclined position to make the folding bench
seat more comfortable ( page 268).
Pull release handle 1 and fold seat
backrest for the folding bench seat up-
ward.
3 Mountings for seat belts
Hook seat belts into mountings 3.
Pull release handle 2 ( page 134)
and fold seat cushion for the folding
bench seat into sitting position.
Press seat cushion as far down as it will
go.
The backrest will then also engage
properly.
Fold head restraints into upright posi-
tion.
Controls in detail
Removing and installing seat cushions
i
You must remove the seat cushion when you
want to raise the loading floor, e.g. in the event
of a flat tire.
Removing
1 Seat guides
2 Seat cushion
Fold seat cushion 2 upward and re-
move it from seat guides 1.
Seats
135