Mercedes-Benz 2007 E -Class Wagon Operator's Manual page 131

Controls in detail
Seats
Head restraint tilt
(rear outer seats only)
Two different head restraint angle
positions are available.
1 Release button
Press the release button 1 and tilt the
head restraint to the desired position.
130
Removing and installing rear seat head
restraints
1 Release button
Removing rear seat head restraints
Placing head restraints upright
( page 129).
Pull head restraint to its highest
position.
Push release button 1 and pull out
head restraint.
Installing rear seat head restraints
Insert head restraint and push it down
until it engages.
Push button 1 and adjust head
restraint to desired position.
i
When installing the head restraints, make
sure that:
The proper head restraint for each seat is in-
stalled. The bars of the head restraint de-
signed for the middle rear seat are of even
length and shorter than those designed for
use on the outer rear seats.
The head restraints engage fully.