Power Connection; Aerial Connection; Using Digital Multimedia Connectors; Usb Memory Connection - Hitachi L26VG07U Instruction Manual

Power Connection

IMPORTANT: The TV set is designed to operate
on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the
ambient room temperature before you connect the
set to the mains. Plug the power cable to the mains
socket outlet.

Aerial Connection

• Connect the aerial ,cable TV plug to the AERIAL
INPUT socket located at the rear of the TV.
Using Digital Multimedia
Connectors
• You can connect USB devices to your TV by using
the USB input of the TV. This feature allows you to
display/play JPG, MP3 and video  les stored in a
USB stick.
• It is possible that certain types of USB devices (e.g.
MP3 Players) may not be compatible with this TV.
• You should back up your  les before making any
connections to the TV set in order to avoid any
possible data loss. that manufacturer will not be
responsible for any  le damage or data loss.
• Do not pull out USB module while playing a  le.
WARNING: Quickly plugging and unplugging
USB devices, is a very hazardous operation.
Especially, do not repeatedly quickly plug and
unplug the drive. This may cause physical damage
to the USB player and especially the USB device
itself.
SIDE VIEW USB MEMORY
12
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

USB Memory Connection

IMPORTANT: The TV should be switched off
while plugging or unplugging a USB device. Plug
your USB devices to the USB input of the TV. You can
connect a usb device to your TV by using the USB
input of the TV.
NOTE: It is possible certain types of hard disk
drives are not supported.

Connecting the LCD TV to a PC

For displaying your computer's screen image on your
LCD TV, you can connect your computer to the TV set.
Power off both computer and display before making
any connections. Use 15-pin D-sub display cable to
connect a PC to the LCD TV. When the connection
is made, switch to PC source. See "Input selection"
section. Set the resolution that suits your viewing
requirements. Resolution information can be found
in the appendix parts
.

Using Side AV Connectors

You can connect a range of optional equipment to your
LCD TV using side connectors of the TV.
• For connecting a camcorder or camera , you should
use AV socket (side). To do this, you must use the
supplied video/audio connection cable. First, plug
single jack of the cable to the TV's AV IN socket
(side). Afterwards, insert your camera cable's (not
supplied) connectors into the plural part of the video/
audio connection cable. Colours of the connected
jacks should match. See illustration below.
• Afterwards, you should switch to
the section Input selection in the following sections
for more information.
• To listen the TV sound from headphones, you
should connect headphones to your TV by using the
HEADPHONE jack as illustrated above.
Side AV source. See