Table of Contents
Advertisement
vice technician has used replacement parts which are
specified by the manufacturer or have the same speci-
fications as the original one. Unauthorised substitutions
may result in fire, electrical shock, or other hazards.
9. Servicing
Please refer all servicing to qualified personnel. Do
not remove the cover yourself as this may result in an
electric shock.
Instructions for waste disposal:
• Packaging and packaging aids are recyclable and
should principally be recycled. Packaging materi-
als, such as foil bag, must be kept away from chil-
dren.
• Batteries, including those which are heavy metal-
free, should not be disposed of with household
waste. Please dispose of used batteries in an envi-
ronmentally sound manner. Find out about the le-
gal regulations which apply in your area.
• Cold cathode fluoresant lamp in LCD PANEL con-
tains a small amount of mercury, please follow lo-
cal ordinates or regulations for disposal.
: To prevent injury, this device must be se-
curely attached to the floor/wall in accordance with
the installation instructions.
"The LCD panel is very high technology product with
about a million thin film transistors, giving you fine
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fixed point of blue,
green or red. Please note that this does not affect the
performance of your product."
“DO NOT LEAVE YOUR TV AT STAND-BY OR OPER-
ATING WHEN YOU LEAVE YOUR HOUSE”
‘’In order to avoid possible accidents,
please do keep children away from the
moving gear located at the rear bottom
side of your TV.”
All manuals and user guides at all-guides.com
English - 6 -
Before Switching On Your TV
Power Connection
The TV set is designed to operate on
220-240V AC. For this, an adaptor is used which
gives 12V DC voltage.
Connections To The Aerial Input Socket
• Connect the aerial or cable TV plug to the Aerial input
socket located at the rear of the TV and connect the
cable plug coming out from the TV out socket lo-
cated on the devices (VCR, DVB etc.) to this socket
as well.
9+)8+)
S@6SÃPAÃUC@ÃUW
Inserting Batteries In The Remote
Control Handset
Remote control is batteries are included.
A plastic protector is used to disconnect the batteries
in order to prevent the battery life from reducing.
Please remove the plastic protector before the first
use.
Inserting The Battery In The Remote
Control Handset
• Remove the battery cover located on the back of the
handset by gently pulling backwards from the indi-
cated part.
• Insert two
inside.
• Replace the battery cover.
867G@ÃUWÃ
or equivalent type batteries
Advertisement
Table of Contents
